This is a general overview of the Skid Steer style Quick Attach System. For detailed fitment or compatibility questions you may contact us or use the “my machine” section on our web site to search the make and model of your machine.
Prior to 1994, manufacturers of skid steers used a variety of designs for their attachment hookup systems. After 1994 an ASE standard became available and most manufacturers switched to this uniform style that we use today. Below is a top, front, and side view CAD drawing of the Quick Attach plate with included dimensions in inches. This style of plate is what you will hook into on the back of our skid steer attachments.
Now for what should be on your machine. Below is a picture of a hydraulically locking Quick Attach system on a skid steer. This is for informational purposes only as yours may appear different and may be manual locking. There should be two pins on your machine that lock in a downward position. The two feet on either side hook up into the top lip of the skid steer plate, and the bottom pins lock into place securing the attachment to your machine.
Here is an image of a manual locking Quick Attach system on a tractor that is about ready to hook into a Quick Attach plate on a bucket.
The general width of a modern Quick Attach system on the machine measures 44″ from the outside to outside. There should be two levers or a hydraulic system that pushes two pins out of the bottom of the Quick Attach that should measure about 32” on center. If your system appears significantly different from this please contact us. Keep in mind we also offer a wide variety of 3 point attachments for your tractor as well.
Visit www.quickattach.com to see our complete solutions for skid steer attachments, tractor attachments, mini skid steer attachments, and ATV/UTV attachments.